About Some Properties of Structural Steel Used in the Construction of a Railway Bridge Over the Amur River in the Early XX Century (To the 110ʰᵗ anniversary of the start of construction of the Amur Bridge)
- Authors: Komarov O.N.1, Volkov A.F.2
-
Affiliations:
- Khabarovsk Federal Research Center FEB RAS, Institute of Mechanical Engineering and Metallurgy FEB RAS
- Khabarovsk Federal Research Center FEB RAS, Institute of Mining FEB RAS
- Issue: No 3 (2024)
- Pages: 57-65
- Section: Articles
- URL: https://ter-arkhiv.ru/0044-4472/article/view/635710
- DOI: https://doi.org/10.31659/0044-4472-2024-3-57-65
- ID: 635710
Cite item
Abstract
The main stages of construction in 1913–1916 of the railroad bridge across the Amur River near Khabarovsk are presented. The peculiarities of the construction of the structure in the difficult foreign policy conditions of the beginning of the last century, which caused a reduction in the pace of construction, are noted. The most honored organizers, designers and builders of the Amur Bridge are mentioned. Construction materials and places of their extraction, as well as suppliers of structural steel used in the construction of a unique transportation structure are specified. The methods of construction and assembly of the main load-bearing elements of the bridge structure are considered. Special attention is paid to the study of chemical composition, microand macrostructure, hardness of structural steels used in the manufacture of bridge spans. Conclusions about the conformity of the chemical composition of the investigated materials to the alloys specified in the current normative documentation, as well as the method of their smelting are formed. Modern metal materials used in the reconstruction of the bridge crossing at the beginning of the XXI century are given for comparison. The functionality of the bridge after reconstruction is reflected and the potential of its further development is given. A promising method of increasing the complex of characteristics of metal products by processing billets in solid-liquid state, which allows to reduce the metal consumption of structures, is considered.
Full Text
About the authors
O. N. Komarov
Khabarovsk Federal Research Center FEB RAS, Institute of Mechanical Engineering and Metallurgy FEB RAS
Author for correspondence.
Email: olegnikolaevitsch@rambler.ru
Candidate of Sciences (Engineering), Assistant Professor
Russian Federation, 1, Metallurgov Street, Komsomolsk-on-Amur, 681005
A. F. Volkov
Khabarovsk Federal Research Center FEB RAS, Institute of Mining FEB RAS
Email: volkov-af@igd.khv.ru
Chief Engineer
Russian Federation, 51, Turgeneva Street, Khabarovsk, 680000References
- Lisitsyn A.A. Construction of a railway bridge across the Amur near Khabarovsk (1913–1917). Proektirovanie razvitiya regional’noi seti zheleznykh dorog. 2016. No. 4, pp. 259–273. (In Russian).
- Burkova V.V. Creators of the Amur Bridge. Put’ i putevoe khozyaistvo. 2017. No. 7, pp. 38–40. (In Russian).
- Beckert M., Klemm H. Sposoby metallurgicheskogo travleniya [Methods of metallurgical etching]. Moscow: Metallurgiya. 1988. 400 p.
- Bokshtein B.S., Veksler Yu.G., Glezer A.M., Drozdovsky B.A. Metallovedenie i termicheskaya obrabotka stali [Metallurgy and heat treatment of steel]. Moscow: Metallurgiya. 1991. 464 p.
- Filinov S.A., Firger I.V. Spravochnik termista [Thermist’s Handbook]. Moscow-Leningrad: Mashinostroenie. 1964. 244 p.
- Shmykov A.A. Spravochnik termista [Thermist’s Handbook]. Moscow: Mashinostroenie. 1961. 392 p.
- Gulyaev A.P. Metallovedeniye [Metallurgy]. Moscow: Metallurgiya. 1986. 544 p.
- Sokolov R.A., Novikov V.F., Muratov K.R., Venediktov A.N. Determination of the relationship between the factor of different grain sizes and the corrosion rate of structural steel. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty). 2020. Vol. 22. No. 3, pp. 106–125. (In Russian). doi: 10.17212/1994-6309-2020-22.3-106-125
- Sergeev Yu.G., Sharapova D.M. Study of the chemical composition, hardness and metal structure of welded joints made of 15HSND steel in relation to bridge span structures. Voprosy materialovedeniya. 2009. No. 4 (60), pp. 89–100. (In Russian).
- Sergeeva A.M. Lovizin N.S. Experimental setup and methodology for studying the formation and changes in the structure of metal solidifying under thermomechanical influence. Tekhnologiya materialov. 2023. No. 5, pp. 17–25. (In Russian). doi: 10.31044/1684-2499-2023-0-5-17-25
- Sosnin A.A., Zhilin S.G., Komarov O.N. Analytical forecasting of the stability of the process of forming an extended forging in a device for casting and metal deformation. Uchenye zapiski of Komsomolsk-on-Amur State Technical University. 2021. No. 3 (51), pp. 62–64. (In Russian). doi: 10.17084/20764359-2021-51-62
- Barsukova N.V., Komarov O.N., Zhilin S.G., Predein V.V., Popov A.V., Khudyakova V.A. Control of the properties of iron-carbon alloys obtained by aluminothermy, varying technological factors. Metallurg. 2023. No. 5, pp. 94–107. (In Russian). doi: 10.52351/00260827_2023_08_94
- Patent RF 2761835. Ustroistvo dlya nepreryvnogo lit’ya i deformatsii ploskikh zagotovok [Device for continuous casting and deformation of flat workpieces]. Sergeeva A.M., Lovizin N.S. Declared 14.07.2021. Publ. 13.12.2021. Bull. No. 35. (In Russian).
- Sergeeva A.M., Lovizin N.S. The features of combining horizontal continuous casting with simultaneous metal deformation in solid-liquid state. Metallurgist. 2022. Vol. 66, pp. 982–988. https://doi.org/10.1007/s11015-022-01410-2
- Volkov A.F. Features of the formation of a system of preferential pension provision in the Far East: history and current state. Sotsial’nye i gumanitarnye nauki na Dal’nem Vostoke. 2010. No. 3 (27), pp. 118–123. (In Russian).
- Volkov A.F. Historical conditions and features of the formation of the system of benefits and pensions in the Far East in the 19th and early 20th centuries. Vlast’ i upravlenie na Vostoke Rossii. 2007. No. 4 (41), pp. 123–128. (In Russian).