Solution of longitudinal shear problems of physically nonlinear bodies with properties depending on the type of stress state

Мұқаба

Дәйексөз келтіру

Толық мәтін

Ашық рұқсат Ашық рұқсат
Рұқсат жабық Рұқсат берілді
Рұқсат жабық Рұқсат ақылы немесе тек жазылушылар үшін

Аннотация

Deformation properties of structural materials, rocks, composite materials, etc. depend on the type of external action, and the degree of this dependence is determined by the structural features of the materials. These materials are characterized by a relationship between volume and shear deformation. Deformation curves are nonlinear even at small deformations. This paper presents constitutive relations describing the nonlinear behavior of these materials under small deformations. It is shown that classical hypotheses of anti-plane shear cannot be applied. The problem of anti-plane shear of a long prismatic body with a square cross-section containing a round through hole in the plane of the cross-section is solved numerically. It is shown that under shear loading conditions, the body is characterized by a triaxial stress state and a change in volume.

Толық мәтін

Рұқсат жабық

Авторлар туралы

E. Lomakin

Lomonosov Moscow State University

Хат алмасуға жауапты Автор.
Email: evlomakin@yandex.ru

Corresponding Member of the RAS

Ресей, Moscow

O. Korolkova

Lomonosov Moscow State University; Research Institute of Mechanics of Lomonosov Moscow State University

Email: ol.shendrigina@mail.ru
Ресей, Moscow; Moscow

Әдебиет тізімі

  1. Lomakin E.V., Fedulov B.N. Nonlinear anisotropic elasticity for laminate composites // Meccanica. 2015. V. 50. P. 1527–1535. https://doi.org/10.1007/s11012-015-0104-5
  2. Fedulov B.N., Bondarchuk D.A., Lomakin E.V. Longitudinal elastic nonlinearity of composite material // Frattura ed Integrità Strutturale. 2024. V. 18. № 67. P. 311–318. https://doi.org/10.3221/IGF-ESIS.67.22
  3. Obid Š., Halilovič M., Urevc J., Starman B. Non-linear elastic tension–compression asymmetric anisotropic model for fibre-reinforced composite materials // Intern. J. Engineering Science. 2023. V. 185. 103829. https://doi.org/10.1016/j.ijengsci.2023.103829
  4. Smith E.W., Pascoe K.J. The role of shear deformation in the fatigue failure of a glass fibre-reinforced composite // Composites. 1977. V. 8. Iss. 4. P. 237–243. https://doi.org/10.1016/0010-4361(77)90109-4
  5. ASTM Standards: ASTM D3039/D3039M-14: Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials // ASTM International. 2014. https://doi.org/10.1520/D3039_D3039M-14
  6. Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture // ASTM International. 2016. ASTM D6641/D6641M-16e2. https://doi.org/10.1520/D6641_D6641M-16E01
  7. Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus // ASTM International. 2017. ASTM E111-17. https://doi.org/10.1520/E0111-17
  8. Walsh J.B. The effect of cracks on the compressibility of rocks // J. Geophys. Res. 1965. V. 70. Iss. 2. P. 381–389. https://doi.org/10.1029/JZ070i002p00381
  9. Walsh J.B. The effect of cracks in rocks on the uniaxial elastic compression of rocks // J. Geophys. Res. 1965. V. 70. Iss. 2. P. 399–411. https://doi.org/10.1029/JZ070i002p00399
  10. Sun J.-Y., Zhu H.-Q., Qin S.-H., Yang D.-L., He X.-T. A review on the research of mechanical problems with different moduli in tension and compression // J. Mech. Sci. Technol. 2010. V. 24. P. 1845–1854. https://doi.org/10.1007/s12206-010-0601-3
  11. Rabotnov Y.N. Creep Problems in Structural Members. Amsterdam: North-Holland, 1969. 822 p. https://doi.org/10.1115/1.3408479
  12. Lomakin E.V. Mechanics of media with stress-state dependent properties // Physical Mesomechanics. 2007. V. 10. Iss. 5–6. P. 255–264. https://doi.org/10.1016/j.physme.2007.11.004
  13. Lomakin E., Korolkova O. Stress and strain fields near cracks in solids with stress state-dependent elastic properties under conditions of anti-plane shear // Acta Mechanica 2024. V. 235. P. 6585–6597. https://doi.org/10.1007/s00707-024-04034-6
  14. Ramberg W., Osgood W.R. Description of stress-strain curves by three parameters: Technical Report NACA-TN-902. 1943.

Қосымша файлдар

Қосымша файлдар
Әрекет
1. JATS XML
Жүктеу
2. Fig. 1. Equivalent stress-strain curves for gray cast iron SCh 15–32 at different values of the parameter ξ: ⅓ (1), 0.232 (2), 0 (3), –0.064 (4), –0.126 (5), –⅓ (6).

Жүктеу (12KB)
Метадеректер
3. Fig. 2. Section of the body under consideration under longitudinal shear conditions.

Жүктеу (5KB)
Метадеректер
4. Fig. 3. Distribution of deformations (a) and stresses (b) along the straight line x₂ = 0.

Жүктеу (21KB)
Метадеректер
5. Fig. 4. Distribution of deformations (a) and stresses (b) along the straight line x₁ = 0.

Жүктеу (23KB)
Метадеректер
6. Fig. 5. Volumetric deformation (a) and hydrostatic pressure (b) at x₁² + x₂² = a²

Жүктеу (15KB)
Метадеректер

© Russian Academy of Sciences, 2025