Dissipative theory in the residential buildings pipe-concrete structures study
- 作者: Rimshin V.I.1,2, Krishan A.L.3, Astafeva M.A.3, Ketsko E.S.2, Bykov G.S.2
-
隶属关系:
- Scientific-Research Institute of Building Physics of RAACS
- National Research Moscow State University of Civil Engineering
- Nosov Magnitogorsk State Technical University
- 期: 编号 6 (2024)
- 页面: 4-7
- 栏目: International Scientific Conference – XV Academic readings dedicated to the memory of Academician of RAACS Osipov G.L., "Actual problems of building physics. Energy saving. Reliability of building structures and environmental safety. Artificial Intelligence"
- URL: https://ter-arkhiv.ru/0585-430X/article/view/635016
- DOI: https://doi.org/10.31659/0585-430X-2024-825-6-4-7
- ID: 635016
如何引用文章
详细
The pipe-concrete structures stress-strain state and load-bearing capacity abstract theorem are discussed in this article and experimental studies are carried out to confirm them. Pipe concrete structures prototypes were made of high-strength concrete with spiral reinforcement and high-strength longitudinal reinforcement. The developed compressed pipe-concrete structures have increased strength and have high ultimate axial deformations. Significantly greater energy is required compared to traditionally used load-bearing elements to destroy such a structure. This circumstance makes them especially attractive for use in buildings and structures erected in seismically active zones, as well as for unique buildings and structures. The compressed pipe-concrete element design was improved based on the research results. It was possible to significantly increase its strength compared to known analogues due to the high-strength tensile concrete use. Such elements maximum deformation exceeds 1%, which opens up good opportunities for use. The developed structure high strength and ductility indicate that their destruction requires a large energy. It will significantly increase the frames survivability made of using pipe-concrete elements.
全文:
作者简介
V. Rimshin
Scientific-Research Institute of Building Physics of RAACS; National Research Moscow State University of Civil Engineering
编辑信件的主要联系方式.
Email: v.rimshin@niisf.ru
Doctor of Sciences (Engineering), Professor, Corresponding Member of RAACS
俄罗斯联邦, Moscow; MoscowA. Krishan
Nosov Magnitogorsk State Technical University
Email: kris_al@mail.ru
Doctor of Sciences (Engineering), Professor, Adviser of RAACS
俄罗斯联邦, MagnitogorskM. Astafeva
Nosov Magnitogorsk State Technical University
Email: skymanika@mail.ru
Candidate of Sciences (Engineering), Docent
俄罗斯联邦, MagnitogorskE. Ketsko
National Research Moscow State University of Civil Engineering
Email: kkuzzina@mail.ru
Postgraduate student
俄罗斯联邦, MoscowG. Bykov
National Research Moscow State University of Civil Engineering
Email: admin.nex@gmail.com
Engineer
俄罗斯联邦, Moscow参考
- Римшин В.И., Кришан А.Л., Астафьева М.А. Самозаклинивающиеся элементы в трубобетонных колоннах // Academia. Архитектура и строительство. 2023. № 3. С. 140–148. Rimshin V.I., Krishan A.L., Astafieva M.A. Self-jamming elements in pipe-concrete columns. Academia. Arkhitektura i stroitel’stvo. 2023. No. 3, pp. 140–148. (In Russian).
- Кришан А.Л., Римшин В.И., Астафьева М.А., Ступак А.А., Анпилов С.М. Учет гибкости при расчете прочности центрально-сжатых трубобетонных колонн квадратного сечения // Строительство и реконструкция. 2023. № 4 (108). С. 47–56. Krishan A.L., Rimshin V.I., Astafieva M.A., Stupak A.A., Anpilov S.M. Taking into account flexibility when calculating the strength of centrally compressed tube-concrete columns of square section. Stroitel’stvo i rekonstruktsiya. 2023. No. 4 (108), pp. 47–56. (In Russian).
- Римшин В.И., Анпилов С.М., Кришан А.Л., Астафьева М.А., Ступак А.А. Прочность коротких трубобетонных колонн квадратного сечения // Русский инженер. 2023. № 2 (79). С. 46–48. Rimshin V.I., Anpilov S.M., Krishan A.L., Astafieva M.A., Stupak A.A. Strength of short tube-concrete columns of square section. Russkii inzhener. 2023. No. 2 (79), pp. 46–48. (In Russian).
- Кришан А.Л., Римшин В.И., Астафьева М.А., Ступак А.А., Сулейманова Л.А., Логунова М.А. SQCFST_1_1 Свидетельство о регистрации программы для ЭВМ RU 2022683412, 05.12.2022. Заявка № 2022682987 от 28.11.2022. Krishan A.L., Rimshin V.I., Astafieva M.A., Stupak A.A., Suleymanova L.A., Logunova M.A. SQCFST_1_1 Certificate of registration of the computer program RU 2022683412, 12/05/2022. Application No. 2022682987 dated November 28, 2022. (In Russian).
- Римшин В.И., Кецко Е.С., Трунтов П.С. Большой строительный словарь. Т. 1. А-О. М.: АСВ, 2022. 572 c. Rimshin V.I., Ketsko E.S., Truntov P.S. Bol’shoy stroitel’nyy slovar’. Vol. 1. A-O. [Large construction dictionary. Vol. 1. A-O.] Moscow: ASV. 2022. 572 p.
- Римшин В.И., Кришан А.Л., Астафьева М.А., Семенова М.Н., Курбатов В.Л. Исследования несущей способности центрально-сжатых сталетрубобетонных колонн // Жилищное строительство. 2022. № 6. С. 33–38. DOI: https://doi.org/10.31659/0044-4472-2022-6-33-38. Rimshin V.I., Krishan A.L., Astafieva M.A., Semenova M.N., Kurbatov V.L. Studies of the bearing capacity of centrally compressed steel-tube concrete columns. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2022. No. 6, pp. 33–38. (In Russian). DOI: https://doi.org/10.31659/0044-4472-2022-6-33-38
- Кришан А.Л., Римшин В.И., Астафьева М.А., Сагадатов А.И., Семенова М.Н., Ступак А.А. Прочность и деформативность сжатых трубобетонных элементов квадратного сечения // БСТ: Бюллетень строительной техники. 2022. № 6 (1054). С. 16–18. Krishan A.L., Rimshin V.I., Astafieva M.A., Sagadatov A.I., Semenova M.N., Stupak A.A. Strength and deformability of compressed tube-concrete elements of square section. BST. 2022. No. 6 (1054), pp. 16–18. (In Russian).
- Римшин В.И., Якимишин Д.В., Кришан А.Л., Астафьева М.А. Анализ эффективности применения композитных материалов для реконструкции // Университетская наука. 2022. № 2 (14). С. 83–87. Rimshin V.I., Yakimishin D.V., Krishan A.L., Astafieva M.A. Analysis of the effectiveness of using composite materials for reconstruction. Universitetskaya nauka. 2022. No. 2 (14), pp. 83–87. (In Russian).
- Кришан А.Л., Римшин В.И., Астафьева М.А. Сжатые трубобетонные элементы. Теория и практика. М.: АСВ, 2020. 322 с. Krishan A.L., Rimshin V.I., Astafieva M.A. Szhatyye trubobetonnyye elementy. Teoriya i praktika [Compressed pipe concrete elements. Theory and practice]. Moscow: ASV. 2020. 322 p.
- Римшин В.И., Кецко Е.С., Трунтов П.С. Этапы технического обследования конструкций административного здания // Жилищное строительство. 2020. № 6. С. 22–28. DOI: https://doi.org/10.31659/0044-4472-2020-6-22-28. Rimshin V.I., Ketsko E.S., Truntov P.S. Technical inspection stages of administrative building structures. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2020. No. 6, pp. 22–28. (In Russian). DOI: https://doi.org/10.31659/0044-4472-2020-6-22-28
- Krishan A.L., Astafeva M.A., Rimshin V.I., Chernyshova E.P. Interlocking elements application in concrete filled steel tubular columns. Advances in Transdisciplinary Engineering. Vol. 43: Hydraulic and Civil Engineering Technology. 2023, pp. 34–41. DOI https://doi.org/10.3233/ATDE230699
- Rimshin V.I., Telichenko V.I., Truntov P.S., Krishan A.L., Bykov G.S. Assessment of the impact of high temperature on the strength of reinforced concrete structures during operation. Key Engineering Materials. 2021. Vol. 887, pp. 460–465. DOI: https://doi.org/10.4028/www.scientific.net/KEM.887.460
- Kablov E.N., Erofeev V.T., Zotkina M.M., Dergunova A.V., Moiseev V.V., Rimshin V.I. Plasticized epoxy composites for manufacturing of composite reinforcement. Journal of Physics: Conference Series. Vol. 1687. International Conference on Engineering Systems. 14–16 October 2020, Moscow, Russia. DOI https://doi.org/10.1088/1742-6596/1687/1/012031
- Krishan A.L., Rimshin V.I., Troshkina E.A. Deformability of volume-compressed concrete core of concrete filled steel tube columns. IOP Conference Series: Materials Science and Engineering. 2020. Vol. 753. Ch. 1. 022053. DOI https://doi.org/10.1088/1757-899X/753/2/022053
- Merkulov S.I., Rimshin V.I., Shubin I.L., Esipov S.M. Modeling of the stress-strain state of a composite external strengthening of reinforced concrete bending elements. IOP Conference Series: Materials Science and Engineering. 2020. Vol. 753. Ch. 4. 052044. DOI https://doi.org/10.1088/1757-899X/753/5/052044
- Merkulov S., Rimshin V., Akimov E., Kurbatov V., Roschina S. Regulatory support for the use of composite rod reinforcement in concrete structures. IOP Conference Series: Materials Science and Engineering. 2020. Vol. 896. International Conference on Materials Physics, Building Structures and Technologies in Construction, Industrial and Production Engineering (MPCPE 2020). 27–28 April 2020. Vladimir, Russian Federation. 012022 DOI https://doi.org/10.1088/1757-899X/896/1/012022
- Varlamov A., Kostyuchenko Y., Rimshin V., Kurbatov V. Diagrams of concrete behavior over time. IOP Conference Series Materials Science and Engineering. 2020. Vol. 896 (1). 012085. DOI: https://doi.org/10.1088/1757-899X/896/1/012085
- Krishan A., Troshkina E., Rimshin V. Experimental research of the strength of compressed concrete filled steel tube elements. Advances in Intelligent Systems and Computing. 2020. Vol. 1116, pp. 560–566. DOI: https://doi.org/10.1007/978-3-030-37919-3_56
- Krishan A.L., Rimshin V.I., Troshkina E.A. Compressed and bending concrete elements with confinement reinforcement meshes. IOP Conference Series: Materials Science and Engineering. 2020. Vol. 753. Ch. 1. 022052. DOI https://doi.org/10.1088/1757-899X/753/2/022052