The Influence of High Temperature on the Properties of Modified Cement Stone
- Авторлар: Chayka T.V.1, Gavrish V.M.1, Oleynik A.Y.1
-
Мекемелер:
- Sevastopol State University
- Шығарылым: № 7 (2024)
- Беттер: 54-59
- Бөлім: Results of scientific research
- URL: https://ter-arkhiv.ru/0585-430X/article/view/635047
- DOI: https://doi.org/10.31659/0585-430X-2024-826-7-54-59
- ID: 635047
Дәйексөз келтіру
Аннотация
The influence of highly dispersed tungsten-containing powders (WC, WO3, a mixture of WC, TiC) obtained as a result of recycling of carbide products on change in the structural and physico-mechanical properties of cement materials at elevated temperatures has been studied. Powders of tungsten carbide WC, tungsten oxide WO3, mixtures of tungsten and titanium carbides WC, TiC (average particle size 20–150 nm, agglomerates 300 nm – 1.5 microns) were added to the cement mortar, by partial replacement of the binder, in various concentrations (1–5 wt. %). The effect of additives on the thermal stability of cement samples was assessed by weight loss, residual compressive strength, exposed to temperatures at 300, 600 and 800оC for 2 hours. The microstructural analysis was performed using scanning electron microscopy (SEM) with an integrated energy dispersion analysis system. It was established that in the entire temperature range under consideration (20–800оC), the modified samples demonstrate a denser microstructure, have less mass loss and have increased residual compressive strength compared with the control composition. The obtained research results are of considerable value for understanding the mechanisms of influence of highly dispersed tungsten-containing particles on the characteristics of cement materials under high-temperature exposure.
Толық мәтін
Авторлар туралы
T. Chayka
Sevastopol State University
Хат алмасуға жауапты Автор.
Email: TVChayika@sevsu.ru
Senior Lecturer
Ресей, SevastopolV. Gavrish
Sevastopol State University
Email: vmgavrish@mail.sevsu.ru
Candidate of Sciences (Engineering), Associate Professor
Ресей, SevastopolA. Oleynik
Sevastopol State University
Email: ayoleinik@mail.sevsu.ru
Postgraduate Student, Assistant
Ресей, SevastopolӘдебиет тізімі
- Sikora P., Abd Elrahman M., Stephan D. The influence of nanomaterials on the thermal resistance of cement-based composites – a review. Nanomaterials. 2018. Vol. 8. 465. https://doi.org/10.3390/nano8070465
- Abbas S., Nehdi M.L., Saleem M.A. Ultra-high-performance concrete: mechanical performance, durability, sustainability and implementation challenges. International Journal of Concrete Structures and Materials. 2016. Vol. 10, pp. 271–295. https://doi.org/10.1007/s40069-016-0157-4
- Hager I. Behaviour of cement concrete at high temperature. Bulletin of the Polish Academy of sciences technical sciences. 2013. Vol. 61. No. 1. DOI: https://doi.org/10.2478/bpasts-2013-0013
- Yang Xu, Run-Sheng Lin, Yi Han, Xiao-Yong Wang. Behavior of biochar-modified cementitious composites exposed to high temperatures. Materials. 2021.Vol. 14. 5414. https://doi.org/10.3390/ma14185414
- Cao M., Yuan X., Ming X. et al. Effect of high temperature on compressive strength and microstructure of cement paste modified by micro- and nano-calcium carbonate particles. Fire Technology. 2022. Vol. 58, pp. 1469–1491. https://doi.org/10.1007/s10694-021-01211-0
- Hafiz Waheed Iqbal, Rao Arsalan Khushnood, Waqas Latif Baloch, Adnan Nawaz, Rana Faisal Tufail. Influence of graphite nano/microplatelets on the residual performance of high strength concrete exposed to elevated temperature. Construction and Building Materials. 2020. 253. 119029. https://doi.org/10.1016/j.conbuildmat.2020.119029
- Yuzhuo Wang, Zejian Liu, Shuang Qu, Junlin Gong, Xiao Lyu. Fire resistance of reinforced concrete beams: State of the art, analysis and prediction. Construction and Building Materials. 2023. Vol. 409. 134029. https://doi.org/10.1016/j.conbuildmat.2023.134029
- Mashshay A.F., Hashemi S.K., Tavakoli H. Post-fire mechanical degradation of lightweight concretes and maintenance strategies with steel fibers and nano-silica. Sustainability. 2023. Vol. 15. No. 9. 7463. https://doi.org/10.3390/su15097463
- Voutetaki M.E., Naoum M.C., Papadopoulos N.A., Chalioris C.E. Cracking diagnosis in fiber-reinforced concrete with synthetic fibers using piezoelectric transducers. Fibers. 2022. Vol. 10. No. 1. https://doi.org/10.3390/fib10010005
- Tobbala D.E., Rashed A.S., Tayeh B.A. et al. Performance and microstructure analysis of high-strength concrete in corporate with nanoparticles subjected to high temperatures and actual fires. Archives of Civil and Mechanical Engineering. 2022. Vol. 22. 85. https://doi.org/10.1007/s43452-022-00397-6
- Seleem S.E. Ahmad, Hossam S. Khalil, Ibrahim A. Sharaky, Ahmad M. El-Azab. Performance of residual properties for high strength concrete incorporating nanosilica against temperatures. Stroitel’nye Materialy [Construction Materials]. 2018. No. 11, pp. 8–14. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2018-765-11-8-14
- Irshidat M R, Al-Nuaimi N, Rabie M. Influence of carbon nanotubes on phase composition, thermal and post-heating behavior of cementitious composites. Molecules. 2021. Vol. 26 (4). 850. https://doi.org/10.3390/molecules26040850
- Dong Lu, Xianming Shi, Jing Zhong. Interfacial bonding between graphene oxide coated carbon nanotube fiber and cement paste matrix. Cement and Concrete Composites. 2022. Vol. 134. 104802. https://doi.org/10.1016/j.cemconcomp.2022.104802
- Mohammed A., Al-Saadi N.T.K., Sanjayan. J. Inclusion of graphene oxide in cementitious composites: state-of-the-art review. Australian Journal of Civil Engineering. 2018. Vol. 16 (2), pp. 81–95. DOI: https://doi.org/10.1080/14488353.2018.1450699
- Lu Dong, Zhong Jing. Carbon-based nanomaterials engineered cement composites: a review. Journal of Infrastructure Preservation and Resilience. 2022. 3. 10. https://doi.org/1186/s43065-021-00045-y
- Khan M.A., Imam M.K., Irshad K., Ali H.M., Hasan M.A., Islam S. Comparative overview of the performance of cementitious and non-cementitious nanomaterials in mortar at normal and elevated temperatures. Nanomaterials. 2021. 11 (4). 911. https://doi.org/10.3390/nano11040911
- Agzamov F.A., Grigoryev A.Y. Modification of Portland cement with nanoadditives. Nanotechnologies in Construction. 2022. 14 (4), pp. 319–327. https://doi.org/10.15828/2075-8545-2022-14-4-319-327
- Ahmed A. Amer, Tarek M. El-Sokkary, Nagwa I. Abdullah. Thermal durability of OPC pastes admixed with nano iron oxide. HBRC Journal. 2015. Vol. 11. Iss. 2, pp. 299–305. https://doi.org/10.1016/j.hbrcj.2014.04.002
- Ghazanlou S.I., Jalaly M., Sadeghzadeh S. et al. A comparative study on the mechanical, physical and morphological properties of cement-micro/nano Fe3O4 composite. Scientific Reports. 2020. Vol. 10. 59. https://www.nature.com/articles/s41598-020-59846-y
- Aref Sadeghi-Nik, Javad Berenjian, Ali Bahari, Abdul Sattar Safaei, Mehdi Dehestani. Modification of microstructure and mechanical properties of cement by nanoparticles through a sustainable development approach. Construction and Building Materials. 2017. Vol. 155, pp. 880–891. https://doi.org/10.1016/j.conbuildmat.2017.08.107
- Kanagaraj B., Nammalvar A., Andrushia A.D., Gurupatham B.G.A., Roy K. Influence of nano composites on the impact resistance of concrete at elevated temperatures. Fire. 2023. 6 (4). 135. https://doi.org/10.3390/fire6040135
- Europäische Patentanmeldung EP 3 138 932 A1 Verfahren und vorrichtung zur gewinnung eines pulvers aus partikeln von wolfram oder wolframverbindungen mit einer partikel grösse im nano-, mikron- oder submikronbereich. Galuga A., Baranov G., Gavrish V., Smirnov S., Losenkov A., Vostrognutov S. Declared 01.09.2015. Published 08.03.2017.
- Chaika T.V., Gavrish V.M., Pavlenko V.I., Cherkashina N.I. Influence of high-dispersive powder mixture of WC and TiC on the composite materials properties. Nanotechnologies in construction. 2023. No. 15 (1), pp. 14–26. EDN: TSWXBD. https://doi.org/10.15828/2075-8545-2023-15-1-14-26
- Chayka T.V., Gavrish V.M., Cherkashina N.I., Sidelnikov R.V., Romanyuk D.S. Modification of composite materials with highly dispersed WC and WO3 powders. Stroitel’nye Materialy [Construction Materials]. 2023. No. 10, pp. 121–128. (In Russian). https://doi.org/10.31659/0585-430X-2023-818-10-121-128
- Chayka T.V., Gavrish V.M., Rapatskiy Yu.L., Lypka V.M., Chayka А.К. Effects of highly dispersed WC powder on the properties of cement stone at elevated temperatures. Advanced technologies and materials: Materials of the International Scientific and Practical Conference. Sevastopol. 2022. pp. 437–439. (In Russian).
- Tantawy M. Effect of high temperatures on the microstructure of cement paste. Journal of Materials Science and Chemical Engineering. 2017. Vol. 5, pp. 33–48. 10.4236/msce.2017.511004
- Leonovich S.N., Litvinovsky D.A., Chernyakevich O.Yu., Stepanova A.V. Prochnost, treshchinostojkost i dolgovechnost konstrukcionnogo betona pri temperaturnyh i korrozionnyh vozdejstviyah [Strength, crack resistance and durability of structural concrete under temperature and corrosion influences]. Minsk: BNTU. 2016. 393 p.
- Demin Jiang, Haodong Xu, Shuchen Lv et al. Properties of flame-retardant leaf fiber cement-based composites at high temperatures. Heliyon. 2022. Iss. 8 (12). e12175. https://doi.org/10.1016/j.heliyon.2022.e12175
- Abdelmelek N., Lubloy E. Evaluation of the mechanical properties of high-strength cement paste at elevated temperatures using metakaolin. Journal of Thermal Analysis and Calorimetry. 2021. Vol. 145, pp. 2891–2905. https://doi.org/10.1007/s10973-020-09992-2